Hah!
 |
@GTV reviews the Cosmic Fantasy 1-2 Switch collection by Edia, provides examples of the poor English editing/localization work. It's much worse for CF1. Rated "D" for disappointment, finding that TurboGrafx CF2 is better & while CF1's the real draw, Edia screwed it up... |
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
#2
Off-Topic / Re: Random Pictures Thread
04/26/2018, 08:46 AM
I dare you to use the pic above as your temporary avatar for one week.
Also:
Also:
#5
Off-Topic / Re: What do you depise AT THIS MOMENT, literally....
04/20/2018, 04:04 AMThe same goes for image links to Youtube preview pictures.
#8
Off-Topic / Re: What happened to Nudity?
04/04/2018, 03:53 AM
Punch, you're free to post boobs wherever and whenever you like in this thread. Here's an animated tit gif for you:
#9
Off-Topic / Re: What happened to Nulltard?
03/29/2018, 02:23 AMQuote from: guest on 03/28/2018, 06:19 PMMan, I shot my xseed all over her tits....
#10
PCE/TG-16|CD/SGX Discussion / Re: Shoutbox
03/27/2018, 02:10 AM
Games I'd like to play:
Arkhanoid: Revenge of D'oh!
Arkhanoid: Revenge of D'oh!
#16
PCE/TG-16|CD/SGX Discussion / Re: Shoutbox
03/16/2018, 05:39 AM
"Looks like she ain't so happy to see your lil' Arkhan peeping out of your pants. Is she?"
#17
Off-Topic / Re: Idiot of the month March 2018
03/15/2018, 05:57 PM
To quote Nulltard:
EDIT: Oh wait, that's Porkins.
EDIT: Oh wait, that's Porkins.
#18
Off-Topic / Re: Donald Trump Thread aka End of Days
03/15/2018, 05:14 PM
Trump twitters today:
"They say I had an affair with that famous porn star.
Not true! She isn't famous!"
"They say I had an affair with that famous porn star.
Not true! She isn't famous!"
#20
Off-Topic / Re: Donald Trump Thread aka End of Days
03/12/2018, 01:24 PM
Trump twitters today:
"That Kim is actually not such a bad guy. Found out we have a lot in common. #Friendship is magic"
"That Kim is actually not such a bad guy. Found out we have a lot in common. #Friendship is magic"
#22
Off-Topic / Re: The Anime Thread: Finding Good Anime
03/08/2018, 06:11 AMQuote from: TR0N on 03/08/2018, 03:26 AMThat's a good one far as ending credits go.I need to pick it up again since it got a official release through discotekmedia.
Quote from: guest on 11/01/2015, 01:13 PMSo if this appears to become a "look what I got to make you jealous" thread, I think I need to post this to stop you guys.
#26
Off-Topic / Re: Donald Trump Thread aka End of Days
02/20/2018, 03:38 PM
Trump twitters today:
"Take what you want, but leave gun owners alone!"
"Take what you want, but leave gun owners alone!"
#27
Off-Topic / Re: Draw a game with MS Paint quiz
02/20/2018, 03:29 PM
*farts* next one is up you lazy excuses of sorry asses.
#28
Off-Topic / Re: Donald Trump Thread aka End of Days
02/13/2018, 03:38 AM
Trump twitters today:
"Don't let feka news mislead you. The Turbo Duo is the first CD game system on the market!"
"Don't let feka news mislead you. The Turbo Duo is the first CD game system on the market!"
#29
General Gaming / Re: Playstation kicked fucking ass
02/07/2018, 03:08 AMQuote from: Psycho Punch on 02/06/2018, 07:10 PMAll PS2s have hardware retrocompat, the real problem is that the PS1 chip acts as the PS2's IO controller in PS2 mode. USB/HDD = PS2 Kernel Mode, Booting a PS1 game makes the IO chip take over the console hardware until reboot.This!
Quote from: bob on 02/06/2018, 09:52 PMi found a sweet adapter that allows you to use a ps controller on a gamecube or xbox. it has usb too, but i haven't tried one on the pc yetI have found a sweet adaptor that allows you to use a PlayStation controller on the Xbox 360, and vice-versa.
http://www.dx.com/p/ps2-to-xbox-360-controller-adapter-cable-33241
I've only tested it so far to use PS2 controllers on Xbox 360, and it works. You NEED a _wired_ Xbox 360 controller plugged into the USB jack of the adaptor as well, though, to make the Xbox 360 recognise the adaptor. Still, this is a pretty chinsy-flimsy Chinesium design, the build-quality isn't anything to write home about. At least there's no noticeable input lag, and guess what I'm kind of anal about any lag.
Useful for 2D games (e.g. the Monster World collection and Pac Man C.E.) as well as fighting games, because they benefit greatly from a good d-pad.
Otherwise, this is my go-to adress for all kinds of useful adaptors, they're the best:
http://www.raphnet-tech.com/
#30
Off-Topic / Re: Draw a game with MS Paint quiz
02/04/2018, 03:35 PMQuote from: guest on 01/31/2018, 11:37 PMIf you guys stay indecisive until Sunday, I'll post the next pic.Where I live, it is Sunday night now.
#31
Buy/Sell/Trade / Re: WTB Batman New & Sealed for $100
02/01/2018, 03:42 AMQuote from: tbone3969 on 01/31/2018, 10:38 AMQuote from: Gypsy on 01/31/2018, 10:36 AMBuy a used copy and say you opened it. Problem solved.lol, yes. Anyone have a used copy for sale? Even those go for $50 - $60 it seems.
#33
PCE/TG-16|CD/SGX Discussion / Re: UK Console power supply's on a PCE Duo
01/29/2018, 06:29 AM
(Pic source: konsolenkost.de)
Hah! I just found an original PAL Sega Mega Drive power supply model no. 1602-18 (for 220 V / 50 Hz regions) among my spares.
10 V DC
1.2 A
Along with an adaptor for the Turbo Duo power inlet, this should do the trick.
EDIT: Well, this power supply is a bit like Schroedinger's cat. It does and it doesn't.
Why? Because it has a reversed polarity on the plug: Positive voltage on the outer ring and ground being on the tip.
Do not use it.
Unless you have another adaptor handy that reverses the polarity to positive tip and outer ring ground. I did built such an adaptor by myself, since I had the parts available among my spares anyway.
#35
Console Repair/Mod Center / Re: Turbo Duo doesn't power up
01/25/2018, 02:08 PM
Looks so much more tidy now with the new flexible wiring on the AV port. I also took the time to clean the PCB from the brownish flux residue using "Kontakt LR" flux remover.
I've now found the cause for the shorts. Do you see the black wires near the tantalum caps in the lower left? Just where they go down the PCB to the underside, their PVC coat is slightly worn. Thus they are just ever so slightly touching the metal shield once the PCB sits on the screw mounts.
Using a Proxxon Micromot 50/E, I cut away a portion of that metal shield and sanded it.
The black leads got additional isolation using elec-chicken's tape.
It werkz!
I tried both Hucard and CD games. They play fine, BUT there is one issue left.
The volume for Redbook CD-audio is pretty low. Either I've managed to damage one of the caps, or there is a potentiometer for turning up the CD-audio volume. Please let me know what you guys think I should look for when examining the board next time.
#36
Off-Topic / Draw a game with MS Paint quiz
01/23/2018, 03:50 PM
Guess the game and draw the next one. Simple.
EDIT: Seemingly not simple enough for you guys, so here are the rules:
1st RULE: You do not talk about Draw a game with MS Paint quiz.
2nd RULE: You DO NOT talk about Draw a game with MS Paint quiz.
3rd RULE: If someone says "stop" or goes limp, taps out the fight is over.
4th RULE: Forget about rule 3.
5th RULE: One quiz at a time.
6th RULE: Only ONE guess at a time per post by every participant.
7th RULE: If somebody mentions several games within the same post, only the first guess will be entered.
8th RULE: No shirts, no shoes.
9th RULE: Quizzes will go on as long as they have to.
10th RULE: The first participant who guesses the correct game wins.
11th RULE: If you win a quiz at Draw a game with MS Paint quiz, you HAVE to draw a new game.
EDIT: Seemingly not simple enough for you guys, so here are the rules:
1st RULE: You do not talk about Draw a game with MS Paint quiz.
2nd RULE: You DO NOT talk about Draw a game with MS Paint quiz.
3rd RULE: If someone says "stop" or goes limp, taps out the fight is over.
4th RULE: Forget about rule 3.
5th RULE: One quiz at a time.
6th RULE: Only ONE guess at a time per post by every participant.
7th RULE: If somebody mentions several games within the same post, only the first guess will be entered.
8th RULE: No shirts, no shoes.
9th RULE: Quizzes will go on as long as they have to.
10th RULE: The first participant who guesses the correct game wins.
11th RULE: If you win a quiz at Draw a game with MS Paint quiz, you HAVE to draw a new game.
#38
Console Repair/Mod Center / Re: Turbo Duo doesn't power up
01/21/2018, 01:29 PM
I managed to resolder that red capacitor. Luckily, I didn't need a botch wire, I just needed to carefully scrape the PCB surface to get enough copper surface for the leg to attach.
Then, I put some paper between the PCB and the bottom metal shield, to prevent accidental shorts. I haven't replaced the voltage regulators yet.
The power supply now shows 10 V and a current draw of 0.45 amps.
Probing on to the fuse shows 9 V. There must be a 1 V loss somewhere between the power connector and the fuse. What the...
Still, probing around the board, including the voltage regulators, shows a voltage of 5 V. Bang on! Both regulators are getting slightly warm, but not hot. Probing the AV output shows voltage on the pins. Could it be...?
Needless to say, I couldn't wait to connect my Turbo Duo to the TV. Still powered by the lab supply, where the hell is my dedicated power adaptor brick? I've got no idea.
As you can see, the console has been brought back to life, and I spent some time playing Gradius and Peach Boy.
Thanks again to all you guys for your support and giving me confidence. You rock.
Final thoughts:
When putting the PCB back into the case, I'll have to see if there's any unwanted contact between the metal shield and some component legs sticking out.
Then, I put some paper between the PCB and the bottom metal shield, to prevent accidental shorts. I haven't replaced the voltage regulators yet.
The power supply now shows 10 V and a current draw of 0.45 amps.
Probing on to the fuse shows 9 V. There must be a 1 V loss somewhere between the power connector and the fuse. What the...
Still, probing around the board, including the voltage regulators, shows a voltage of 5 V. Bang on! Both regulators are getting slightly warm, but not hot. Probing the AV output shows voltage on the pins. Could it be...?
Needless to say, I couldn't wait to connect my Turbo Duo to the TV. Still powered by the lab supply, where the hell is my dedicated power adaptor brick? I've got no idea.
As you can see, the console has been brought back to life, and I spent some time playing Gradius and Peach Boy.
Thanks again to all you guys for your support and giving me confidence. You rock.
Final thoughts:
When putting the PCB back into the case, I'll have to see if there's any unwanted contact between the metal shield and some component legs sticking out.
#39
Off-Topic / Re: Tits or Ass?
01/16/2018, 08:43 AMQuote from: SiberianSpForces on 11/29/2017, 11:49 PMBetter contribute, for science!Above: 10 points to Griffindor.
http://www.primecurves.com/jaime-changing-in-the-bathroom/6.jpg
She calls herself K-A-N-A. I've met her twice on conventions. Initially performing cute cosplays, she eventually moved to suggestive photography similar to the Japanese gravure idol style. The pic I chose to show is from an intermediate period.
#40
Console Repair/Mod Center / Re: Turbo Duo doesn't power up
01/14/2018, 11:18 AM
Gentlemen, welcome back to the shop.
If you guys have any advice, even for the really obvious things, I'd be very thankful!
The current setup:
BM 235 connected in series between power supply and Turbo Duo for measuring current. Fluke 12E+ connected in parallel to measure voltage between Duo's ground and some points on the Duo's PCB. Please note the CD-Rom cables are currently not attached. The unit has beed recapped by somebody who I can vouch for that he knows what he's doing. The RGB mod and the region switch however look rather amateurish to me and have been done by the previous owner. Pic taken with the power supply being turned off.
Adjustable power supply. Able to deliver up to 15 V at 3 amps. Pic taken at no load.
A closer look at the power connector.
Let's flip the power switch to ON.
Mhm... that left power regulator is getting pretty hot. The right one stays cold as ice.
No wonder. That darn thing is trying to pull 2 amps. What the fuck.
Look at the power supply to confirm what the DMM is saying. Yep, that's 20 Watts of angry pixies dancing merrily around the circuit.
Let's measure the voltage on the leftmost pin of the left power regulator.
8.5 V. I don't know if this is good or bad.
Oh well. Let's flip the power switch to OFF and examine the PCB.
Look at that component. I guess that's some cap which is a little bit "how-are-you-doing"? Or is he trying to say "look mommy, I can stand on one leg!"?
The underside of the PCB. The wires for the RGB mod are actually stiff single core wires instead of proper flexible multi core ones. I guess I'll have to replace them sooner than later.
A look at the soldering joints of that mischievious voltage regulator.
Addendum:
Some shop humor.
One ruler to rule them all!
If you guys have any advice, even for the really obvious things, I'd be very thankful!
The current setup:
BM 235 connected in series between power supply and Turbo Duo for measuring current. Fluke 12E+ connected in parallel to measure voltage between Duo's ground and some points on the Duo's PCB. Please note the CD-Rom cables are currently not attached. The unit has beed recapped by somebody who I can vouch for that he knows what he's doing. The RGB mod and the region switch however look rather amateurish to me and have been done by the previous owner. Pic taken with the power supply being turned off.
Adjustable power supply. Able to deliver up to 15 V at 3 amps. Pic taken at no load.
A closer look at the power connector.
Let's flip the power switch to ON.
Mhm... that left power regulator is getting pretty hot. The right one stays cold as ice.
No wonder. That darn thing is trying to pull 2 amps. What the fuck.
Look at the power supply to confirm what the DMM is saying. Yep, that's 20 Watts of angry pixies dancing merrily around the circuit.
Let's measure the voltage on the leftmost pin of the left power regulator.
8.5 V. I don't know if this is good or bad.
Oh well. Let's flip the power switch to OFF and examine the PCB.
Look at that component. I guess that's some cap which is a little bit "how-are-you-doing"? Or is he trying to say "look mommy, I can stand on one leg!"?
The underside of the PCB. The wires for the RGB mod are actually stiff single core wires instead of proper flexible multi core ones. I guess I'll have to replace them sooner than later.
A look at the soldering joints of that mischievious voltage regulator.
Addendum:
Some shop humor.
One ruler to rule them all!
#43
Off-Topic / Re: Donald Trump Thread aka End of Days
01/04/2018, 10:20 AM
Trump twitters today:
"I am number one keyboard warrior. Deal with it!"
"I am number one keyboard warrior. Deal with it!"
#45
Off-Topic / Re: Donald Trump Thread aka End of Days
12/29/2017, 03:33 PM
Trump twitters today:
"RyuHayabusa is a total loser."
"RyuHayabusa is a total loser."
#48
Off-Topic / Re: Random Pictures Thread
12/03/2017, 04:23 PM
Look mom, it's a Duo in its natural habitat!
Source:By the way, I guess holding the controller and sitting like that for a prolonged time will be painful for both lower back and arms.
Source:By the way, I guess holding the controller and sitting like that for a prolonged time will be painful for both lower back and arms.
#49
Off-Topic / Re: Documentary: The Evolution of Your Gaming Setup (aka Happy Place)
12/01/2017, 04:26 PM
...time to revive this old thread.
My happy gaming place as it looks at this very moment.
Please... don't mind the alcohol. We were in the middle of a Devil's Crush session, six people trying to beat the highscore.
The HiFi/AV shelf on the right was constructed and built by myself, just so you know. The rest is Ikea stuff.
EDIT: So funny, I just noticed the infrared glow of the Wii sensor bar being visible on the photo.
My happy gaming place as it looks at this very moment.
Please... don't mind the alcohol. We were in the middle of a Devil's Crush session, six people trying to beat the highscore.
The HiFi/AV shelf on the right was constructed and built by myself, just so you know. The rest is Ikea stuff.
EDIT: So funny, I just noticed the infrared glow of the Wii sensor bar being visible on the photo.
#50
Off-Topic / Re: Random Pictures Thread
11/30/2017, 06:25 AM
WiFi names can still be funny.
Source and much more:
https://www.quora.com/What-are-some-cool-names-for-my-WiFi
Source and much more:
https://www.quora.com/What-are-some-cool-names-for-my-WiFi