Graphics Issue - white PCE

Started by wolfman, 12/30/2017, 04:45 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

wolfman

Hello,

I am having an issue here. I hoped it would go away after a re-cap, but it is still there:

IMG
IMG

In the first picture the darker parts of "CD Rom System" are affected.
In the second picture it is the letters in the lower part of the screen - they are hardly noticable, but actually should be greyish on a working PCE.

EDIT: I have tested alongside with my Core Grafx - this error only shows up on the white PCE.

Sound and animation are not affected (no artifacts noticeable), only this colouration issue.

Where should I look for? What is causing this?
recent addition: Japanese Language Skills, A1 proficiency level
-------------------------------------------------------------
CryptoCoin Warrior
My Setup: PC Engine LT, CD-ROMĀ², IFU-30
AKA woolfman on AtariAge, PlanetVB, Circuit-Board.
-------------------------------------------------------------

LowRes

I had a similar issue but much worse.  I'd be looking at the two 20256 ram chips or the HuC6270 chip.  Look for broken traces related to those 3 chips

I'm sure guys on here will have some better advice for you, but that's where I would start.
Started a US TurboGrafx-16 Collection in 2017! ... Then I moved on to PC Engine

wolfman

I have checked all data lines from 6760 to both RAMs - there is connection on all data lines.

What else could it be?
recent addition: Japanese Language Skills, A1 proficiency level
-------------------------------------------------------------
CryptoCoin Warrior
My Setup: PC Engine LT, CD-ROMĀ², IFU-30
AKA woolfman on AtariAge, PlanetVB, Circuit-Board.
-------------------------------------------------------------

Ergot_Cholera

I have had a few original PC Engines with graphical issues, I fixed them by replacing the HSRM20256LM chips. Try searching SRM20256 for the part.