Print Page - Slightly different repair problem

Title: Slightly different repair problem
Post by: jayamine on 02/27/2012, 06:39 PM

My friend's Sega CDX died last week. Anyone here know how to open those little guys and find out what's wrong?

Already opened it and found one dead Capacitor. Changed it and still dead. The system died when he tried to run it (against my advice) with a Genny model 2 power supply.

Anyway, he's willing to mail it off, and pay, etc. So PM me if you can help.

Thanks
Joe

Title: Re: Slightly different repair problem
Post by: incrediblehark on 03/03/2012, 09:38 AM

do those things have any fuses that could be changed? might me the cause if there is absolutely no power going to it

Title: Re: Slightly different repair problem
Post by: Frank_fjs on 03/03/2012, 10:06 AM

Quite common for the fuses to blow in them, especially when a PSU with incorrect polarity is plugged in. Hopefully no further damage was done.

Title: Re: Slightly different repair problem
Post by: thesteve on 03/05/2012, 12:53 AM

if its got a 7805 regulator in it everything beyond it would be protected.

Title: Re: Slightly different repair problem
Post by: jayamine on 03/05/2012, 12:54 AM

Can anyone do the repair job? Or can anyone post a graphic of the board with instructions, etc? Might have to mail the system off to someone.

Title: Re: Slightly different repair problem
Post by: incrediblehark on 03/09/2012, 05:08 PM

If its just a fuse it is a super easy fix, even i could do it for you, if you wanted to cover shipping both ways.

Title: Re: Slightly different repair problem
Post by: jayamine on 03/12/2012, 09:20 PM

Does it require soldering? My friend wants to mail it off to you. He'll pay for everything. Can you PM me so I can put you two in touch?

Title: Re: Slightly different repair problem
Post by: incrediblehark on 03/12/2012, 10:18 PM

no problem

PCEngine-FX.com

NEC PC Engine/TurboGrafx-16 Games/Consoles => Console Repair/Mod Center => Topic started by: jayamine on 02/27/2012, 06:39 PM