PCEngine-FX.com

Nothing special, but I AV modded a TG-16. I grabbed V,L,R,G from under the board where the 69 pin connector is.
Works really good!

http://flic.kr/p/fP4zA4

You should try the S-Video Mod. :-k

is there a tutorial on how to do this mod?

Quote from: fsa on 09/11/2013, 10:59 AMYou should try the S-Video Mod. :-k

Have no use for Svideo really. I don't even have many TVs that have Svid inputs anymore.

Quote from: albatross on 09/11/2013, 11:01 AMis there a tutorial on how to do this mod?

I used this link for the pins. Just find where they are on the bottom of the board. You'll need to unsolder or bend the shielding back (I bent it back). Then its a simple task of drill holes and soldering the wires to the rca jacks.

http://www.cgquarterly.com/articles/tg16_cable.htm

great!  thank you sir!

Quote from: albatross on 09/11/2013, 12:53 PMgreat!  thank you sir!

Hey, if you do it post pics. It's always interesting to see how mods turn out. Even simple ones.

well i have one that was already started but im going to complete it and take pics for sure - hopefully it works when its done

buy a tennoke bank 2. can get them for about $15 on ebay from time to time. av mod it and have battery backup to boot. just need to shave the connector with a hack saw blade and it will hug a us tg16 like a glove.