PCEngine-FX.com

Hello, for those who want use the PC Engine on Peritel/Scart connector (I use it also on my projector with H and V sync so it would be possible that some VGA screen will accept it), I propose this RGB board. The price is 25€ (with 2 adhesive holders), without shipping. Actually I have 8 pcb available (parts non mounted for the moment). output signals available (RGB, sync, and output for RGB commutation).

Lost: imageshack.us/img196/2439/9plh.jpg

Image Comparison:

Nice looking board.

thanks.

In the first picture, am I seeing S-Video?

1st picture ?
the Sy out ? it's sync output.

Your PC engine also deserves a merry xmas.

(https://web.archive.org/web/20130131205726im_/http://blog.unesourisetmoi.info/data/images/photos/01/mere-noel_1.jpg)
(https://web.archive.org/web/20190509163042im_/http://www.fetes-par-fetes.com/imagesUp/produits/photo-noel-deguisement-adulte-noel-femmes-costume-mere-noel-sexy-vert,7615,1.jpg)
(https://web.archive.org/web/20150316171347im_/http://www.thecostumeshop.ie/images/thumbnails/250/300/detailed/9/blue_present.jpg)

(*) miss Santa not included :D

Me like:)

special price for the 1st board.
20€ without shipping.
 :dance:

up !
 :dance:

quality!!!

First one sold to Belgium. Others available.
and Happy New Year ! :dance:

The CTX chip can be tapped for RGB, S-video or composite; certainly on TurboGrafx. Connecting to a SCART cable is quite simple too, and gives a nice image.

What does this mod offer as extra benefit, just curious - does it work on all versions of systems?

I don't know what is a CTX chip, I just try it on my Duo with Hsync and Vsync on my Projector, normally with its size, it should fit a PC engine too, so, to answer your question I didn't try it on another console than mine and I'm not interested to use S-video or composite as they are (normally) in lower quality.
I don't think this mod offer extra benefits, because I didn't have the possibility to see another kind of boards, just my previous composite, But I'm happy with the results. The extra test I have to try is to check if it works also on some VGA screens, that would be nice (for example I have a friend who don't care about TV and don't have one, but would appeciate to use its console on his computer screen).

Hello, this is a RGB amp board only right? Could it work with a Commodore RGB monitor? I use it with the RGB from the scart out of some other consoles (like Megadrive) and it works fine.

If it works for what I need, I want one please!

Thanks!

Hello, no reason that it's not works, what is your monitor reference ?
You wish use it with a PC engine, a Duo ?
you'll have to modify your console connector side and made a custom cable (or buy it one).

Yes, it's for a Duo.

This is my monitor pinout:

http://www.zimmers.net/cbmpics/cbm/monitors/1084s/pinout.html (http://www.zimmers.net/cbmpics/cbm/monitors/1084s/pinout.html)

I can make a custom cable or connector, no problem.

I will send you PM to buy one, thanks!

Ok.

did you design/make these or do you just have a stock of kits from another source?

hello, I done the schematic with my works software (I work in an electronic department) and a subcontractor done the routing, another one done the PCB. I mount the components myself.

payment sent. thanks man!

And received, thanks you.
I'll test it this week, and send it to you asap.

Board sent.
thanks you.

Do you have one left over? Would it fit into the IFU?

 I have some available but I don't know if it fit the ifu, the board size is 5 cm x 2.5 cm.

Quote from: pnauts on 02/19/2014, 04:25 PMI have some available but I don't know if it fit the ifu, the board size is 5 cm x 2.5 cm.

What height?

around 1 cm (without adhesive holders)

Quote from: pnauts on 02/20/2014, 06:08 PMaround 1 cm (without adhesive holders)

Hmm I will have to check for space. Will let you know!

some boards sold, hope to have some feedback here from buyers.

http://www.neo-geo.com/forums/showthread.php?249063-FS-PC-Engine-TurboGrafx16-RGB-amplifiers (http://www.neo-geo.com/forums/showthread.php?249063-FS-PC-Engine-TurboGrafx16-RGB-amplifiers)

$25 shipped, and is IC-based.  Or for $45 shipped you get the DIN connector and a SCART cable with it.  Probably a better option, at least for those of us located here in the US.

IC based too (look 1st picture), But agree with you on US location.

Yeah, sorry, I realized that after I posted.  I'm sure that they are both excellent products, but between the Euro/Dollar conversion and international shipping, I'm figuring that your product would probably run me about $40 shipped.

next to that amount, yes, possible.
I sold one to US and 1 to MX recently, if buyer pass here, they could indicate you.
otherwise, nothing to deal with that but I did try recently to use it with my IIama screen, unfortunately the resolution is not supported (I have to test with another VGA screens)

I would like to recommend this mod to everyone living in PAL world trying to get a decent RGB (NOT component) signal. I am very happy with the picture quality on my CRT TV, I get clear colours and crisp blacks, very clean. I am using it on my current setup in my briefcase unit.

The chip is very small, comes with matching adhesive clips to mount inside wherever there is space. It worked right from the start for me, there is no pot to adjust. I am using it with an RCA to SCART customized cable capable of the necessary 6 signals passing thru (R,G,B,Blanking,5V,GND).

For the technically not so equiped a manual how to and what to solder would be a good thing. This is missing at the moment and would help starters, I'd say.

Price and shipping is fair IMO.

thanks for your feedback Wolfman. I have user's manual but I send it by email (Perhaps I didn't had yours) rather to include paper one. Nevertheless user's manual deserve to be a few improved.

and up. 8)

Quote from: CGQuarterly on 04/01/2014, 10:03 AMI'm sure that they are both excellent products, but between the Euro/Dollar conversion and international shipping, I'm figuring that your product would probably run me about $40 shipped.

Not just cause of the that, but the designer of broken's RGB amp really looks like he knows what he's talking about. I would definitely go with his design over others for multiple reasons if I wanted RGB output. There's a PCEFX thread here already:

https://www.pcengine-fx.com/forums/index.php?topic=16556.0 (https://www.pcengine-fx.com/forums/index.php?topic=16556.0)

I work also in electronic department :wink:

2 boards left.

last one (before a new batch). thanks to buyers for their confidence.

Just wanted to say this amp works great and is super easy to install. Working perfectly in my supergrafx and here's a few shots.

(https://i.imgur.com/WOWlkZbl.jpg)
(https://i.imgur.com/lWtORnzl.jpg) (http://gamingafter40.blogspot.com/2009/11/clueless-gaijin-gaming-gulclight-tdf-2.html)
(https://i.imgur.com/i5uAYlgl.jpg)

thanks you for the feedback, if you have at less 1 composite screen to compare, it would be nice.
Enjoy your SGFX !

Some boards on the road.
Available probably at the mi august.

mounted in a SCD²

http://image.noelshack.com/fichiers/2014/32/1407159930-p1060386.jpg (http://image.noelshack.com/fichiers/2014/32/1407159930-p1060386.jpg)
http://image.noelshack.com/fichiers/2014/32/1407159901-p1060384.jpg (http://image.noelshack.com/fichiers/2014/32/1407159901-p1060384.jpg)

Up!

4 sold.
2 ready to ship.

Mounted one in a SCD².
and Up! (boards also available on Ebay).

How would this work in the U.S.?  I imagine it won't work on our T.V.'s?

Do you have scart on your TV ?
if yes it works.

To celebrate my daughters's birthday, price is reduce to 20€ all the week.

end of the discount.

2-3 boards available by the end of next week.

1 sold to Russia, 3 left for the moment.

1 board available.

I'll take that last one.  PM sent.

thanks, replied.
some others should be ready perhaps by May.

2 boards available.

Up !

1 sold.
And Bump.

Free shipping until end of the week.

2 sold.

Soon available again, price down 20€ without shipping.
Can be used with the H&V sync available inside to VGA screen which handles the 15KHz.
Screenshots comparison still in p.1.

It's been a while, boards available.
pics in opening post.

Up! make your PCE brighter than you christmas tree.

 :dance:

Up
(and update of the missing pics in p.1)

video posted today by a customer for a RGB SCD² http://youtu.be/xFlagSan9bc