PCEngine-FX.com

NEC PC Engine/TurboGrafx-16 Games/Consoles => PCE/TG-16|CD/SGX Discussion => Topic started by: pixeljunkie on 04/17/2006, 03:48 PM

Title: Hori 6 button pads
Post by: pixeljunkie on 04/17/2006, 03:48 PM
are these compatible with Fatal Fury Special and World Heroes....and if so....what the hell am I doing wrong?! Only I and II buttons register. :(
Title: Hori 6 button pads
Post by: Keranu on 04/17/2006, 03:49 PM
Is there a mode button anywhere on the controller like the Avenue Pad 6 and RX pad? Change the setting on that if there is. Haven't used one myself so I wouldn't know.
Title: Hori 6 button pads
Post by: pixeljunkie on 04/17/2006, 03:52 PM
Quote from: KeranuIs there a mode button anywhere on the controller like the Avenue Pad 6 and RX pad? Change the setting on that if there is. Haven't used one myself so I wouldn't know.

good question...I'll try it again tonight and see.
Title: Hori 6 button pads
Post by: Superfamifreak on 04/17/2006, 03:55 PM
Yeah, you need to flip them to 6 button mode. On a side note, they are the best 3rd party pads ever made!
Title: Hori 6 button pads
Post by: rolins on 04/17/2006, 04:06 PM
Yeah on the Hori pad theres is a switch that says 2B and 6B. Set it to 6B for 6-button mode.