PCEngine-FX.com

Hi guys.

I have successfully completed a component mod on my TG16, but sadly this doesn't work on every component capable TV (Some say Invalid Format)

In order to use my TG16 on incompatable TV's i'd like to create the best composite signal possible.

I have tested tapping in to the expansion port pins, but the quality is pretty low and the colors look very washed out.

Have any of you had good results with a composite amp? If so, where do you generally tap in for composite video?

Look forward to your responses!

Are you talking about modern displays?

It could be that they don't recognize a signal with really low resolution, even if it is coming through a component cable.

The display will recognize the "Y" output from the composite mod, through the Composite Video input (Black and white, super clear)

The display will NOT recognize the video through the Y Pb Pr input on the TV

I have tested both component and RCA cables, but still get no picture "or even a flicker" through component input on the TV.

This is why i decided to mod a clean Composite output for TV's that won't recognize the component signal (I purchased a board from Turbokon)

So without having to hunt down a very specific TV, i'd like to get a nice, clean composite signal out to basically "any" composite video device.

the stock composite quality on the TG16 is quite good
you could also try an S-Vid mod as some TV's will perform better with it.

By stock do you mean the output from the composite pin on the expansion port?

You can do s-video mod and get an adapter to composite. Composite should slightly be better this way.

yes i mean the pin on the expansion bus

Thanks guys. I finished up the mods I needed on my TG16 tonight =)

Using DB9 serial for controllers
Component Video
Composite Video
Stereo Audio
LED Logo Illumination

I had a good time with it =)

Welcome to the forums!  You switched out the controller connectors?  Pictures?

I switched them out for my TG16 and Turbo Duo. I didn't like the super short cables, and felt mini-din connectors were a bit fragile.

I will get pics in the morning =)