Hi Everyone,
Can anyone tell me, Does the RAU-30 deliver power to run the Supergrafx so it does not need its own power supply? It would make sense since the little PCE gets its power through the cd-rom interface port, but I need to confirm this since I do not own the RAU-30 yet. :-k
I believe the last time I used a RAU-30 with a SuperGrafx I had to power the SGX with its own supply.
the RAU 30 only serves as a connection extension between the SGFX and the IFU30/SCD device., since the SGFX won't fit into those by default.
Thanks Tatsujin,
Please note: The SG does fit into the SuperCDROM2 add-on. and can be powered with a special jumper from the SuperCD to the SG. It is curious that NEC did not power the SG via the RAU-30 umbilical cord.
oh yes sorry my bad..what i originally ment is, that it basically was designed only for the IFU30 purpose :)
How does that work for the video if one plugs the SGX in this device?
Does it use the video out of the SGX or the one of the IFU-30?
I assume the RAU-30 because of the audio signals coming from CD, but just curious. I have a SGX and an IFU-30 and I contemplating the idea of either getting an RAU-30 or a Super-CD-Rom², and then do tha appropriate RGB mod for whichever ones.
Quote from: mrchuck999 on 02/23/2014, 07:53 PMThanks Tatsujin,
Please note: The SG does fit into the SuperCDROM2 add-on. and can be powered with a special jumper from the SuperCD to the SG. It is curious that NEC did not power the SG via the RAU-30 umbilical cord.
Just make sure you have 6 square feet of surface to place the SGX+SCD2. It's glorious.
PCE/TG-16|CD/SGX Discussion => Topic started by: mrchuck999 on 02/23/2014, 11:35 AM