PCEngine-FX.com

Here is my latest 3D printed part:

(https://jelloslug.com/TG-16/TE%20cover%201.JPG)

(https://jelloslug.com/TG-16/TE%20cover%202.JPG)

(https://jelloslug.com/TG-16/TE%20cover%203.JPG)

It has some very minor fitment issues that I will fix on the next print but other than that I am pleased with the outcome.

It looks perfect jelloslug.  Very nice work.  How are you creating the 3D models to print?

wow, looks tight as a tiger jello!!!

Quote from: FiftyQuid on 07/23/2014, 03:01 PMIt looks perfect jelloslug.  Very nice work.  How are you creating the 3D models to print?

Solidworks

Nice work :-)

That looks damn sexy.  Well done.

Very very cool.

Any chance you could make a cover that could go over top a raw Turbo Everdrive card ?  And have raised TG-16 Logo, or Bonk or similar. Might need to use two way tape to attach it, or clip to the outer edge of the card (I'm no engineer). But somewhat of a dust shield, or protector for those of us that bought the exposed chipset version. Seems StoneAgeGamer is selling them with a small piece of plexi over it. But something 3D printed with a logo, character raised would be awesome .. and something I would most certainly have to purchase.

3D printers are still magic despite me watching videos on how they actually work.  MAGIC !

that's cool

Solid work man! =D>

Quote from: elderbroom on 07/23/2014, 08:57 PMVery very cool.

Any chance you could make a cover that could go over top a raw Turbo Everdrive card ?  And have raised TG-16 Logo, or Bonk or similar. Might need to use two way tape to attach it, or clip to the outer edge of the card (I'm no engineer). But somewhat of a dust shield, or protector for those of us that bought the exposed chipset version. Seems StoneAgeGamer is selling them with a small piece of plexi over it. But something 3D printed with a logo, character raised would be awesome .. and something I would most certainly have to purchase.

3D printers are still magic despite me watching videos on how they actually work.  MAGIC !

I have been working on something like that.  I just need to take my everdrive in and accurately measure the holes in it.

Quote from: jelloslug on 07/23/2014, 09:55 PMI have been working on something like that.  I just need to take my everdrive in and accurately measure the holes in it.

Sweet.  I'll hold off on buying anything until I hear from you.

Awesome work man!!! Looks fantastic.  I will need one for sure.

Solidworks is an awesome program.  I used it for a few years when I did plastic injection molding.  I was pretty novice at it and even I could make some cool models with it.

Very cool. Would be interested in picking one up if you ever plan on selling them.

a lot of people have been waiting a really long time for this stuff, jelloslug.  keep up the good work.  this bud's for you!

Wow, I think you just became a god among men.

Next up, Duo door.

I don't need either, but they have come up *a lot* over the years.

This is awesome. I have the problem of repeatedly taking battery doors off of stuff. Good to know there is a possible replacement if I ever wear the express's out.

I'd love a print of the whole casing, jam a raspberry pi in there and make a custom Obey machine.