Text only | Text with Images

PCEngine-FX.com

NEC PC Engine/TurboGrafx-16 Games/Consoles => Console Repair/Mod Center => Topic started by: Shear_xear on 02/12/2016, 06:11 PM

Title: Good spot to mount Obey chip on Turbografx 16
Post by: Shear_xear on 02/12/2016, 06:11 PM
Hi everyone!  I was installing my Obey chip in my Turbografx 16 and mounted it on the plastic shield over the Hu Card slot.  When I went to put the shell back on I found it was not going to work as the wires were keeping the shell from "locking" into the motherboard.  Where is a good place to put the chip that won't damage the motherboard?  Thanks!  Mike
Title: Re: Good spot to mount Obey chip on Turbografx 16
Post by: turbokon on 02/12/2016, 11:56 PM
Which version obey chip are you using?
Title: Re: Good spot to mount Obey chip on Turbografx 16
Post by: thesteve on 02/12/2016, 11:57 PM
there are 2 punch outs on that board, i punch the one by the slot and set the board there
Title: Re: Good spot to mount Obey chip on Turbografx 16
Post by: Shear_xear on 02/14/2016, 12:04 PM
Awesome!  I thought those looked like they were unused areas, but punch out?  Thanks so much!! Mike
Text only | Text with Images