Text only | Text with Images

PCEngine-FX.com

NEC PC Engine/TurboGrafx-16 Games/Consoles => PCE/TG-16|CD/SGX Discussion => Topic started by: Supercom32 on 05/29/2016, 02:39 PM

Title: How to properly connect a Supergrafx to a Super CDrom2?
Post by: Supercom32 on 05/29/2016, 02:39 PM
Hello, quick question. According to the manuals what is the proper way to connect power to a Supergrafx system and a Super CD-rom 2 combo?
 Do each need their separate Ac adapters?

(https://farm3.static.flickr.com/2138/2254054234_cd6162eed4_o.jpg)

Thanks for any replies.
Title: Re: How to properly connect a Supergrafx to a Super CDrom2?
Post by: CrackTiger on 05/29/2016, 03:02 PM
Separate ACs unless you get the custom power cable.
Title: Re: How to properly connect a Supergrafx to a Super CDrom2?
Post by: Supercom32 on 05/29/2016, 03:10 PM
Quote from: guest on 05/29/2016, 03:02 PMSeparate ACs unless you get the custom power cable.
Thanks for your reply. I know there are made up custom non-official patch cables but, was there an official NEC release of this cable?
Title: Re: How to properly connect a Supergrafx to a Super CDrom2?
Post by: SignOfZeta on 05/29/2016, 05:23 PM
It came with the SuperCDROM2, didn't it?
Title: Re: How to properly connect a Supergrafx to a Super CDrom2?
Post by: TurboXray on 05/29/2016, 05:26 PM
I run a single AC adapter, but I run one with more amp output than the stock ones. I figured if both parts of the system was drawing from it, it might as well be beefier. Yeah, and custom cable needs to be made for the pass through.
Title: Re: How to properly connect a Supergrafx to a Super CDrom2?
Post by: dj898 on 06/19/2016, 05:22 AM
Super CD-ROM2 came with two patch cables - one for PCEngine and the other for SuperGrafx
Text only | Text with Images