PCEngine-FX.com

NEC PC Engine/TurboGrafx-16 Games/Consoles => PCE/TG-16|CD/SGX Discussion => Topic started by: shugs81 on 08/17/2016, 07:17 AM

Title: ifu question...
Post by: shugs81 on 08/17/2016, 07:17 AM
Just a quick question... The av output on an ifu... Will I be able to use it to test everything? And can I still use a megadrive 1 plug to power it???

I picked it up this morning but haven't had time to test it... Stupid work....
Title: Re: ifu question...
Post by: SignOfZeta on 08/17/2016, 08:34 AM
I don't know what you mean by "use it to test". It works, if that's what you mean.
Title: Re: ifu question...
Post by: shugs81 on 08/17/2016, 09:18 AM
sorry... my bad...

I know the RF unit isn't compatible with the uk stuff...

is the IFU compatible with uk tv's without modding?

I'm planning to RGB it anyway but i'd like to be able to test that it works so if there's any other problems then i can sort them while it's open.
Title: Re: ifu question...
Post by: mickcris on 08/17/2016, 09:38 AM
dont think that will fit.  the IFU has a 5.5x2..5mm jack and the mega drive/pc engine is 5.5x2.1mm.  IIRC, it works the other way but not the way you want to use it.  think they changed the plug size so you would use an under powered supply with it.
Title: Re: ifu question...
Post by: shugs81 on 08/17/2016, 09:57 AM
Bah... So I'm going to need another power supply then.... Oh well... Payday on Friday thank god!!
Title: Re: ifu question...
Post by: SignOfZeta on 08/17/2016, 04:51 PM
Quote from: shugs81 on 08/17/2016, 09:18 AMsorry... my bad...

I know the RF unit isn't compatible with the uk stuff...

is the IFU compatible with uk tv's without modding?

I'm planning to RGB it anyway but i'd like to be able to test that it works so if there's any other problems then i can sort them while it's open.
There is zero compatability with PAL in any PCE stuff except for the weird hacks and grey market things and the Euro Turbo.
Title: Re: ifu question...
Post by: shugs81 on 08/17/2016, 05:27 PM
I was more meaning using the ifu would I get a signal on a TV... I just acquired a CRT and it appears that yes it does work!!

Awesomesauce...
Title: Re: ifu question...
Post by: Vimtoman on 08/17/2016, 05:36 PM
Pretty much all Pal TV's accept composite NTSC .
Title: Re: ifu question...
Post by: wildfruit on 08/17/2016, 06:24 PM
Quote from: shugs81 on 08/17/2016, 09:57 AMBah... So I'm going to need another power supply then.... Oh well... Payday on Friday thank god!!
Mine too!
Title: Re: ifu question...
Post by: SignOfZeta on 08/17/2016, 09:42 PM
Quote from: shugs81 on 08/17/2016, 05:27 PMI was more meaning using the ifu would I get a signal on a TV... I just acquired a CRT and it appears that yes it does work!!

Awesomesauce...
In all seriousness, what did you think those jacks could possibly be used for other than video and audio?
Title: Re: ifu question...
Post by: imparanoic on 08/18/2016, 12:12 AM
with native japanese pc engine

unless your TV is multi standard ( very rare in UK, but common in Hong kong),  there is little chance that it can display full colour non rolling stable ntsc with a standard TV via composite

however, CRT professional monitors will work in ntsc

hence, why european gamers had to resort to RGB inorder to play ntsc games which is very common on scart TV,
Title: Re: ifu question...
Post by: Ergot_Cholera on 08/18/2016, 03:08 PM
Quote from: imparanoic on 08/18/2016, 12:12 AMwith native japanese pc engine

unless your TV is multi standard ( very rare in UK, but common in Hong kong),  there is little chance that it can display full colour non rolling stable ntsc with a standard TV via composite

however, CRT professional monitors will work in ntsc

hence, why european gamers had to resort to RGB inorder to play ntsc games which is very common on scart TV,
Nonsense! All TVs sold in the UK/Europe within the last 20 years or so will display an NTSC signal via composite.
Title: Re: ifu question...
Post by: shugs81 on 08/18/2016, 03:19 PM
The ifu works fine through composite onto my Sony wega TV...

I just didn't know if composite was like the rf and would only work in Japan... I just wanted to test it before rgb-ing it...