I bought one of these external boosters from a friend. You can get the on auctions yahoo or ebay. But does anybody know where you can get a case for them? I see stone age gamer sells a case but that is a slightly different booster with a different pin out.... a 3d printable file would als be awsesome....
Nope, unless someone's made one in the last year or so
QuoteNope, unless someone's made one in the last year or so
What a damn shame I can try to whip up something myself
You could try building a case made of plywood or plasticard sheet.
I would rather go with plywood, since you could get away without filling, sanding and painting, and it would still look neat just being held together using wood glue and a few screws.
Quote from: 16bitgium on 04/17/2018, 05:38 PMI bought one of these external boosters from a friend. You can get the on auctions yahoo or ebay. But does anybody know where you can get a case for them? I see stone age gamer sells a case but that is a slightly different booster with a different pin out.... a 3d printable file would als be awsesome....
Put the entire console in a plastic bin, throw a cover on top, and call it a day.
[emoji4]
You might have to cut out some holes for power, AV, controller, etc.
Quote from: esteban on 04/18/2018, 07:33 AMQuote from: 16bitgium on 04/17/2018, 05:38 PMI bought one of these external boosters from a friend. You can get the on auctions yahoo or ebay. But does anybody know where you can get a case for them? I see stone age gamer sells a case but that is a slightly different booster with a different pin out.... a 3d printable file would als be awsesome....
Put the entire console in a plastic bin, throw a cover on top, and call it a day.
[emoji4]
You might have to cut out some holes for power, AV, controller, etc.
yeeeaaah no :p
Put a plastic bag over it
(https://abload.de/img/j6o99lricpaf.png)
Make a cardboard case it shouldn't cost much
PCE/TG-16|CD/SGX Discussion => Topic started by: 16bitgium on 04/17/2018, 05:38 PM