I need to know what value fuse are used in the core grafx and are they slow or fast blow ?
Quote from: seefuu1 on 11/24/2010, 07:16 PMare they slow or fast blow ?
Slow, then fast.
1A 125V. Should be printed directly beneath the fuse on the pcb.
I'm not sure if it was fast or slow, but you can't hurt it by replacing with fast. In general for electronics you can replace a slow with a fast, but you can't replace a fast with a slow. Worst case scenario is that the fuse blows and you then know to get a slow.
Hope that helps :D
Console Repair/Mod Center => Topic started by: seefuu1 on 11/24/2010, 07:16 PM