Sega Lord X reviews the Street Fighter II Champion Edition PC Engine port.
Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Topics - StriderSubzero

#1
Hi,

I have a PC Engine that would not power on, so I replaced the fuse. It then worked fine.

I then made an AV cable following this tutorial: http://www.cgquarterly.com/2010/04/26/building-a-turbografx-16-pc-engine-composite-av-cable/

It worked, then I unplugged the cables in order to heatshrink them (I had them bare before), and then when I plugged them back in, the PC Engine is no longer outputting anything, even through RF. Is it possible I shorted something?

I double-checked my AC adapter with a multimeter and it's fine. I opened it again and the fuse is fine.

If anyone has any ideas please let me know. I'm so frustrated. Thank you.
#2
I bought a PC-Engine (the standard white one) on eBay and the seller claimed that it worked fine. It didn't come with an AC adapter so I used the Genesis model 1 adapter, as it seems compatible. However, I'm not able to get any response from it over RF or by stripping an AV cable and matching it up using the pin schematic I see online. Since there's no LED, I'm not able to tell if it's even getting power. What should I check to verify it's getting power?