Console Repair/Mod Center
Hey all,
So i recently got my duo R in and I thought the rgb scart cable might have been bad because you really had to fiddle with it to even show yellow color at all, everything was predominately orange.
I took apart the console and I could see that the mod job was done with too thick of wire for the three component panel mount jacks on the back of the console. I clipped those as I'm not even wanting to use them, but I realized that the pad had come up on the green wire where it was tapped on the underside of the mobo.
For now, its basically attached to the pin by solder but thats about it.
Is there anything I can do?
*edit I should add the stock AV composite cable works fine, so its possible the scart cable is still an issue as well.
So i recently got my duo R in and I thought the rgb scart cable might have been bad because you really had to fiddle with it to even show yellow color at all, everything was predominately orange.
I took apart the console and I could see that the mod job was done with too thick of wire for the three component panel mount jacks on the back of the console. I clipped those as I'm not even wanting to use them, but I realized that the pad had come up on the green wire where it was tapped on the underside of the mobo.
For now, its basically attached to the pin by solder but thats about it.
Is there anything I can do?
*edit I should add the stock AV composite cable works fine, so its possible the scart cable is still an issue as well.
PCE/TG-16|CD/SGX Discussion