Messages

[Console Repair/Mod Center / Re: REPAIR GUIDE - TurboExpress/PC Engine GT: Video Fix]

Looks like something isn't getting the correct voltage. Make sure there are not any broken traces to any of the caps you installed.

I'm getting 7.8v from an AC adapter.
When unit powers on it drops to 3.8v
Checked some the caps, most read about 3.5-3.7v
Measured on pin 3 of the display ribbon cable only get -2.5v

Anything else I should check and where does the 24v start ?

Thanks

[Console Repair/Mod Center / Re: REPAIR GUIDE - TurboExpress/PC Engine GT: Video Fix]

Hey guys can someone help me with this....
I replaced all 18 capacitors on my TE. End result is no video....backlight works and I have sound! Anyone got any ideas?

I attached a link to a video of my TE