Quote from: choijimmy on 10/11/2015, 01:30 AMMe too. somehow I am UNable to find rechargable ML2016 with fitted legs.Is the ML2032 not a direct replacement? I had thought so... as the ML2032 is rechargeable I though this would last more than a couple of years!?!
I am able to find ML2032 with correct legs which works perfect for few years
 |
RIP to BT Garner of MindRec.com... He passed away early 2023 from health problems. BT was one of the top PCE homebrew developers and founder of the OG Turbo List, then PCECP.com. Condolences to family and friends.  |
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#1
Console Repair/Mod Center / Re: REPAIR GUIDE - Laseractive NEC PAC-N1 / N10: Total capacitor replacement chart
10/11/2015, 11:06 AM
#2
Console Repair/Mod Center / Re: REPAIR GUIDE - Laseractive NEC PAC-N1 / N10: Total capacitor replacement chart
10/10/2015, 03:51 PM
Discovered I had a dead RAM backup battery, original ML2016 now replaced with a shiny new ML2032 rechargeable battery. Slightly thicker than the original but a perfect fit.
#3
Console Repair/Mod Center / Re: REPAIR GUIDE - Laseractive NEC PAC-N1 / N10: Total capacitor replacement chart
09/20/2015, 09:46 AM
For future noobs like myself...
#4
Console Repair/Mod Center / Re: REPAIR GUIDE - Laseractive NEC PAC-N1 / N10: Total capacitor replacement chart
09/18/2015, 08:08 PM
OMG... Thanks so much, thats it!
Cant believe that](/forums/Smileys/default/eusa_wall.gif "Brick wall")
It just makes sense the label should face up, guess not!
Oh well, Sega PAC is fully working, plays PAL carts just fine as well, Everdrive also works perfectly and can be used with a region free bios for mega CD games
Time now to start looking for a N1 PAC...
Cant believe that
It just makes sense the label should face up, guess not!
Oh well, Sega PAC is fully working, plays PAL carts just fine as well, Everdrive also works perfectly and can be used with a region free bios for mega CD games
Time now to start looking for a N1 PAC...
#5
Console Repair/Mod Center / Re: REPAIR GUIDE - Laseractive NEC PAC-N1 / N10: Total capacitor replacement chart
09/18/2015, 05:48 PM
Hello, I've recently replaced all 80 smd caps on a Sega PAC for the laseractive. Very pleased with the result, have been working on my soldering skills for a few years, this was by far the largest job I've attempted. Luckily the caps weren't that bad, most had started leaking but not to the extent of doing much damage. By some small miracle all the caps were removed without lifting a single trace, result!
The laseractive is now almost fully functional... LD movies and mega LD play just fine, have a few movies and one mega LD game (Pyramid Patrol) all working without a hitch. The CD drive is also fully functional, audio and JPN mega CD games play perfectly. I've successfully changed the region on a few USA games and they are working fine as well (using SCDToolz 3.55).
The one issue I have is cartridge based games, all I get is a black screen when powering the unit with a cart connected to the PAC. I had originally thought this was due to me having a JPN region PAC-S1 but no JPN cartridge games. The mega CD games I have running are all JPN, USA/PAL discs don't work without altering region. So I ordered a JPN cartridge game, this arrived today but gives the same black screen as my PAL cartridges (I'm in the UK so everything easily available is PAL here). I also have a mega Everdrive and this also results in a black screen... weird.
Both PAC cart connector and cartridges have been thoroughly cleaned with no change in behavior... same black screen. I'm now lost as to what to try next... any ideas??
Have attached some pics of my soldering wizardry
app.photobucket.com/u/williamjohnsteele
The laseractive is now almost fully functional... LD movies and mega LD play just fine, have a few movies and one mega LD game (Pyramid Patrol) all working without a hitch. The CD drive is also fully functional, audio and JPN mega CD games play perfectly. I've successfully changed the region on a few USA games and they are working fine as well (using SCDToolz 3.55).
The one issue I have is cartridge based games, all I get is a black screen when powering the unit with a cart connected to the PAC. I had originally thought this was due to me having a JPN region PAC-S1 but no JPN cartridge games. The mega CD games I have running are all JPN, USA/PAL discs don't work without altering region. So I ordered a JPN cartridge game, this arrived today but gives the same black screen as my PAL cartridges (I'm in the UK so everything easily available is PAL here). I also have a mega Everdrive and this also results in a black screen... weird.
Both PAC cart connector and cartridges have been thoroughly cleaned with no change in behavior... same black screen. I'm now lost as to what to try next... any ideas??
Have attached some pics of my soldering wizardry
app.photobucket.com/u/williamjohnsteele
Pages1