Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Jeff

#1
I will try that. Who is thesteve and where I he based ?
#2
Hello guys. I have had the loose wires re soldered on the ac power to main board. Still no joy. no cracks in pcb and traces all OK. No idea what else could be wrong.Graphic chip blown ?? Any help would be most appreciated.
#3
Hello,after all of your advice and knowledge I have left the idea of it being the card slot alone.I shone a torch behind the board and no cracks.But I did spot 2 wires adrift where the account power joins to the main board.These wires were intact before but maybe barely.I will get them re soldered and hope that is the solution.All of your help has been great.
#4
Thank you for the reply.After looking at the board and not finding any cracks I thought it must have been the hu card slot.Back to the drawing board.Maybe there is a tiny cracking I have missed.
#5
Thank you for that,I will get the traces checked out and closely inspected for cracks.
#6
Hello,I am wondering if the pin conecter that takes the hu cards is the same in the core grafx is the same as the one in the supergrafx?I need to replace mine in the supergrafx.Any other suggestions are welcome.
#7
I have a core grafx also and wonder if the pin conecter is the same as in the supergrafx?I could use the core as a donor for the supergrafx?
#8
Does anyone know where I can get a replacement pin conecter from?that's worth a try.I am in UK but don't mind if I have to get one from elsewhere.Thank you.
#9
I have has a good look at the pin conecter and it does not look the best.Does anyone know where I would get a replacement.Think that is worth a try.I am in the UK but don't mind if I have to source one anywhere.
#10
I have another supergrafx and use the psu from that one,so don't think that is the problem.Tried the game cards further out and in to no avail.Thank you for suggestions though.
#11
I have checked the board but will look under card slot.Thank you.
#12
Thank you for the replys.I have cleaned the contacts and power supply is correct.
#13
Thank you,I will give that a try tomorrow.
#14
Hello,checked the board and all looks in good condition.
#15
Quote from: guestTry the PCE/SGX mode switch (on the back?).
Hello,I tried the switch first.Definitely not that.Thank you for the reply though.
#16
Hello,I am a new member and I am having trouble with my supergrafx.All I get is a white screen when I insert a game and switch on.Machine has been received capped.Still white screen.Wonder what else could be a miss.Graphic chip blown maybe ?Any help would be most appreciated.