12/23/2024: Localization News - Team Innocent
Received the game 2 days ago without to know whether it exist.
The printed quality is MUCH higher to compare mostly Xbox/PS3 etc. releases
The printed quality is MUCH higher to compare mostly Xbox/PS3 etc. releases
 |
PC-FX Localization for Team Innocent is released, a pre-Christmas gift!! In a twist, it feels like the NEC PC-FX got more attention in 2024 than any other time I can remember! Caveat: The localizers consider the "v0.9" patch a BETA as it still faces technical hurdles to eventually subtitle the FMV scenes, but they consider it very much playable. |
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#2
PCE/TG-16|CD/SGX Discussion / Re: REGION MOD FOR TG-16/DUO/PC-ENGINE
01/05/2007, 05:07 AM
It`s no problem for me that some peoples use my >pictures< e.g. in order to translate in a other language, but please contact me first before you use. Please don`t understand me wrong. I take time to make photos and graphics and I think it should be natural to ask.
I didn`t just to create this account to only complain. I create this account mainly to answer with an idea to make this modification >maybe possible< with just one single-switch to connect lifted Pin 29 to the "Enable" Pins from the switch ICs.
Bye Markus
I didn`t just to create this account to only complain. I create this account mainly to answer with an idea to make this modification >maybe possible< with just one single-switch to connect lifted Pin 29 to the "Enable" Pins from the switch ICs.
Bye Markus
#3
PCE/TG-16|CD/SGX Discussion / Re: REGION MOD FOR TG-16/DUO/PC-ENGINE
01/04/2007, 12:15 PM
@ PCEngineHell
@ thumpin_termis
Those photos and graphics are subject to my copyright. A use without previous arrangement is not allowed.
To the modification: Pin 9 from the MC14551B are only "Enable" Pins. I think, it is >maybe< possible to only connect lifted Pin 29 (from the Hudson-Chip) to the enable Pin 9 from the ICs.
If you have a US System you can solder like this schematic, for the Japanese systems you exchance the wire diagram on one side. I mean, instead A --> H, you solder H -->A sequence in reverse >only< on the connector >or< pcb side.
Here is the datasheet:
http://pdf1.alldatasheet.com/datasheet-pdf/view/11991/ONSEMI/MC14551B.html
Bye Markus
Owner from http://mbrandel.vizionaires.net/
@ thumpin_termis
Those photos and graphics are subject to my copyright. A use without previous arrangement is not allowed.
To the modification: Pin 9 from the MC14551B are only "Enable" Pins. I think, it is >maybe< possible to only connect lifted Pin 29 (from the Hudson-Chip) to the enable Pin 9 from the ICs.
If you have a US System you can solder like this schematic, for the Japanese systems you exchance the wire diagram on one side. I mean, instead A --> H, you solder H -->A sequence in reverse >only< on the connector >or< pcb side.
Here is the datasheet:
http://pdf1.alldatasheet.com/datasheet-pdf/view/11991/ONSEMI/MC14551B.html
Bye Markus
Owner from http://mbrandel.vizionaires.net/
Pages1