Messages

[Buy/Sell/Trade / WTB Duo-R Controller]

Hey all,
 I'm looking to buy a Duo-r controller, I would look at MWGC but I can not go this year. Please let me know what you are wanting for it.
Thanks ahead of time.

[Console Repair/Mod Center / Re: Hop-M3]

I've had good luck with the ones from Dalbani corp on ebay.

HOP-M3-Original-New-Hitachi-Optical-Pickup-HOPM3-for-Denon-Schneider-NAD-Onkyo
https://www.ebay.com/itm/110847999276

[Console Repair/Mod Center / Re: CD-ROM2 Middle gear measurements?]

Here is a replacement gear if you are interested.

http://console5.com/store/turbografx-cd-rom-pc-engine-cd-rom2-replacement-middle-gear.html

[Console Repair/Mod Center / Re: Is anyone free to do an RGB mod?]

Most of my work I have sold on Ebay. Don't really have any references on any boards. Have 100% on evilbay. Mainly do A/V mods on Famicoms and LCD mods on Nomads also have done Recaps of Duo's as well as laser replacements. I have refurbished pce and TG16 Cd units. I'm highschool friends with owner of Console5.com, but I am a lurker on most boards. I have bought gears from Keith Courage and component boards from turbokon (who I met at Midwest)

[Console Repair/Mod Center / Re: Is anyone free to do an RGB mod?]

Very tempted.... But i'm pretty unknown here.

[Buy/Sell/Trade / Re: Turbo/PCE/Genesis/SNES RGB to Component Video (YPbPr) Mod Chip Now For Sale!!!]

Ordered one last day of April, I saw this at MGC and should have picked one up there. I am going to try and use it in an MVS that I am building into a X-Arcade dual stick. Has anyone confirmed it works with an MVS?

[Console Repair/Mod Center / Re: Adaptors to use Duo Controller on TG16 still being made?]

Check out retrogamecave.com they have some under their cable section for about 16.99 or so.

[Console Repair/Mod Center / Re: TGCD won't spin discs!]

It could be many things... Bad laser, bad gear, rails need grease.  I'd say start by cleaning old grease off and apply lithium grease to the rails. then check to see if gears are still whole and freely turn. most are brittle by now. If it is bad look up Keith Courage for a new gear. If its good push the laser to outermost location and see if it comes back to center when powered on. it should then try and focus at center.