12/06/2023: Localization News - Tengai Makyou/Far East of Eden: Ziria!!!

OMG! ZIRIA! ZIRIA!!! IT ACTUALLY HAPPENED!! 34 YEARS LATER!! The epic/legendary Tengai Makyou/Far East of Eden: Ziria JRPG has finally been localized! Supper the Subtitler struck again! Simply unstoppable, NOTHING can prevent him from TOTAL PCECD localization domination!!!! WHACHA GONNA DO BROTHER?!?!
Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Raulie

#1
Yes, I cleaned it first with isopropyl alcohol and cotton swabs, but it didn't work for me.
#2
I got desperate, and I washed the pcb using a hose, a toothbrush, and Palmolive. Now, the sound is perfect!  :D
#3
What a maze! I finally found where pin 4 is connected. It's connected to 2 diodes, which are connected to some transistors, near the 1000µF cap:

IMG

That's it for today... LOL!
#4
Hmm... Right now, it's 1.02V. I removed that cap, and it was pretty clean. I cleaned it again though.
It made no difference.

I'm going to verify all the traces related to that pin.

Thanks!
#5
I turned up the volume, and there's sound! Low crackling sound though.

I read that was your problem pnauts. So, I think I just need to clean the pcb. Let's see...
#6
Thanks for your response pnauts!

There was a broken trace between C305 and R306. Now, I have video, but still no audio.

I've checked the values of every pin and now they're pretty similar to your values:

1 = 7.97V
2 = 2.96V
3 = 3.09V
4 = 5.58V
5 = 7.70V
6 = 0V
7 = 0V
8 = 4.92V
9 = 0V
10 = 2.72V
11 = 0V
12 = 5.58V
13 = 3.1V
14 = 2.95V

At least, now I know that the M51131L is fine.
#7
Hi guys,

I bought a Super CD-ROM² with no sound, and when I tested it out there was no video/audio through Super CD-ROM² output.

If I connect the A/V cable to the Core Grafx, the games play perfectly, but obviously with no CD audio. I've replaced all the capacitors and there's no difference.

The volume balance IC (M51131L) has only 0.77V as supply voltage.

I would be happy, if I could fix just the audio. For video, I can have the RGB mod.

Any ideas?

Regards,
Raulie
#8
Does anyone know what happens when the RF shields aren't installed?
#9
Have you tried to format it? There's a capacitor for saving data (C101). It can be replaced with a MAL219612473E3.