sorry for the delay life is getting in the way lol been busy as hell with work just uploaded the new disk i found here is the link
![]() |
|
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Show posts MenuQuote from: kisaku on 09/03/2017, 11:21 AMHello everyone i have a big problem with a nec laseractive.tray may be out of alignment
Hucards work fine, the problem is with cd and LD.
When i put a cd on it disc spins but after 5 seconds it stops. When i put a LD nothing spins....Laser motor moves and red laser is ok....
Laser gone??
Quote from: deubeul on 08/14/2017, 04:30 AMAnother Laseractive threadtrack alignment may be messed also iv repaired and restored a few units so there not to hard to repair also got a extra parts for the laser active biggest problem with them is if u leave a cd in them and turn it off and move system or lift it up and put it on its side the cd falls off the cd tray and jams the tray most of the time people pry in it to open it and snap off pegs or push the tray off of alignment pm me if ur intrested
I received a junk laseractive last week. The tray opens (with a little help), but it would'nt read anything: any type of discs wasn't spinning.
I swapped the lens with another one (BlueBMW, if you read this, you can add the CLD-900 to the compatible units list) and now regular CDs and LDs play fine.
BUT Mega LDs and MegaCDs don't work. The discs spin, but don't launch. Cartridges work.
So I need help from the tech gurus to narrow down the source of the issue
- If regular CDs and LDs play fine, should Mega CDs and Mega LDs also work, or could the lens be strong enough to read regulars discs but too weak to read games?
- Or could the Sega pac be faulty? I recapped it a while ago, so I quickly checked my old soldering job and it seems fine at first view, except 2 NP caps that don't look genuine and that I'm sure weren't soldered by me.
- I read in some thread that it's possible to adjust the lens power, but I wasn't able to find info in the service manual or in forums. Does anybody know wich pot(s) is concerned?
Thanks in advance for your help
Quote from: HailingTheThings on 09/20/2017, 07:37 PMThat video is awesome! Thank you!lmfao best gif ever
Quote from: Keith Courage on 09/20/2017, 12:46 AMomg! the intro is so insanely early 90s. The tude is so over the top that one might think it's a parody of other promo videos.i know right theres pure meme fuel in this video lol
Quote from: guest on 09/17/2017, 07:05 PMBloody Wolf and Legendary Axe mugsQuote from: mario_pic on 09/17/2017, 03:08 PMhad a few tg16 mugsAhhhh the glorious TG16 mug, you and Esteban will have to have morning coffee together!
I've seen a few of those though, Bloody Wolf and Legendary Axe I think?? Out of curiosity which ones did you get? Dibs on a China Warrior mug so I can break it in front of Psycho Arkhan
Quote from: guest on 09/17/2017, 02:17 PMVery cool man!! Sorry about your friend though.had a few tg16 mugs with the laser disk player and a few laser disks i only tested one but the other 6 need some cleaning
The TG16 kiosk I recently picked up was supposed to come with some promo stuff too, but the seller couldn't find the box (not the one on eBay for 4K USD).Quote from: mario_pic on 09/17/2017, 01:33 AMleft me a lot of promo stuffJust the Laser discs?? or was there more promo stuff ??
Quote from: guest on 09/17/2017, 10:17 AMSounds like it may contain either or both of these:non of thoes ads u just listed been looking around the google and youtube still cant find one thats a match ill load it to my dvr and upload it im working on a pce pac for my laser active so ill find some time today or minfay to upload the video to youtube
Quote from: Freeway2 on 09/16/2017, 05:31 AMI wonder if the water jets masons use would work well.i was thinking to try to use some stain glass working tools to build some by hand as a test but my main problem is the turbo express or pce gt lable i was thinking sand blast the logo in and sand blast for the border and add a black cover behind it
Quote from: Biritix on 06/07/2017, 08:53 AMHello All,um last i checked snes had no region only tge top shell of the console stops u from useing diffrent region games
I was wondering, switchless mods seem to be becoming prevalent on the SNES and with the Megadrive Plus Plus the option is now available for the Genesis.
However, for the TG16 and PCE the only options available are for region mods with switches. I was wondering why that is the case? Is it simply that the community is comfortable with the mods that exist - or is the prevalence of the TED made physically modding consoles largely irrelevant?
Quote from: Mas on 06/09/2017, 05:58 PMIs there anyone here who can fix my turbo express? Or a trusted company or site who can do it? The screen works fine but no sound and even when I have headphones on it's very faint. I will pay for the labor and parts of course.as long as no one took a crappy solder gun pistol to the te its fixable lol let me know i can do the repair im a little backed up for a week or so working on panisonic gamecubes and an hdmi mod for them so i may have some time to work on ur turbo express pm me ur info on what u want done and if its ever been recapped
Quote from: highfroman on 06/01/2017, 10:00 PMany way you could get them done in glass?i may be able to but thickness may be a problem
I would be interested either way in getting a couple of each if they are not super expensive
Quote from: DragonmasterDan on 05/31/2017, 09:41 AMJust curious, are those just the same adapter as the US ones that are known for having the bad tips?the jack quality is bit better then the usa one also less bulky ill open one up and post more pics
Quote from: Warbucks on 05/30/2017, 04:11 PMInterested.. prices?40$ usd with shipping included
Quote from: esteban on 05/27/2017, 02:59 AMI never saw this brand (InterTan) before...did they make other TG-16 accessories?sorry it took so long here are better photos
I would assume so?
Just curious.
Also, would it be possible to get a really clean photo/scan of that logo ("officially TG-16...")
Thank you.

Quote from: mario_pic on 05/26/2017, 09:48 PMwondering if any one is intrested in turbo express and pce gt new old stock power adapters
got my hands on a few let me know thanks
40usd with shipping anywhere in usa and canada international in box me with address and ill get u a shipping price
got it up ans running looks like a bad trace on both ram chips and a bad gpu
Quote from: zetastrike on 05/11/2017, 08:13 PMI got my Duo-R on Monday and it's done this weird thing two times. When playing Gradius II, it hanged at a black screen for longer than it should have when it was supposed to be loading. The first time was after the GAME OVER screen. Instead of quickly loading back to the Konami splash screen, the screen went black for longer than usual. It proceeded to work flawlessly after that for the next few days. Just now, when I went to start a game, it hanged at a black screen before it loaded the first level. And after that, all the music streamed without issue and all subsequent loading happened seamlessly. The drive itself is actually really quiet, much quieter than my Saturn, 3DOs, or Sega CD. I just found it a little alarming that it took a bit for the drive to start seeking and loading on just those two freak occasions. I hope this isn't a sign of it dying.lube the drive rails and worm gear if not its tracking problem pot needs ajustment
Quote from: Fabf on 05/16/2017, 08:25 AMHi to all.look at the vias around the power jack section also clean out threw holes in area i find its mostly ground side of the circut that the threw holes fail
I have a DUO without sound.
I made a cap kit but there's no more sound.
I expect that the PCB have been destroyed by acid.
For now I decided to rebuild amp part on a separate board.
I'v found standard sound signals from HU6260 and all is ok but I can't find sound signals from CD.
If someone can help me.
Best regards
Quote from: guest on 05/19/2017, 11:00 AMGood on you. Thanks for clarifying. You've gotta admit that it seemed a lil shady before.lol i see ur point lol but my member stat as noob is not helping either same on other forms to to many to post enouf to up stats lol with there was a rep system anyways
Quote from: haightc on 05/18/2017, 01:19 PMuse a locktight brand glue made for fiber and cloth it holds realy good plus not to agressive on the topcoat id sand down gently with 600g wet sand paper and then bridge ur gaps with single strand wire after that lay a thin layer if fiber over the pcb and brush on the locktight glue almost like fiber glassing after that let it sit and the repair aill be strong as hell worst case ill buy it if price is right and shell looks good
I can't push the the opposing sides together I'll need to cut out some strain relief sections in the cracks before I can rejoin them.
Quote from: geise on 05/19/2017, 12:49 PMSo the Duo-r you're trading is listed as fully working?correct its working and has new laser
Quote from: Gypsy on 05/19/2017, 11:48 AMOh did you buy that lot of 5 for parts Duo Rs that was up on eBay recently? Did any of them just work? Lol.got the lot off ebay week ago got all but 2 working one has crack pcb im useing it for parts and the otger is gpu or cpu bad has checker board image
Quote from: mario_pic on 05/19/2017, 10:39 AMi got 5 duo r units so dont judgephotos the panisonic q is for scale lolplus y whould i screw my rep on here are plus like if said b4 id rather sell here b4 i toss them on ebay first like the last lot of turbo trafx cd systems i had or boxed tg 16 units