Opening PCE Duo

[futureman2000]

So, I decided to open up the PCE Duo to add an s-video mod. I got the security screws out, but the case is not coming open very easily. I know that there is a region mod inside (which I didn't do), so I don't want to jostle things too much.

It looks like there is a clip on the rear underside of the console that holds the top down. Aside from this, what should I watch out for that could be holding the case together?

I did some light prying near the Hu slot, and it didn't want to budge...

Thanks!

[Duo_R]

it should honestly be the screws and thats it. Make sure you got every screw off.

[futureman2000]

it should honestly be the screws and thats it. Make sure you got every screw off.

Hm. There were four screws on the underside, and those are all out. I looked for others, and can't find any. I'll keep at it.

[Duo_R]

Just took a look at mine and it has 5 screws
 4 in the corners, and one off to the left from the center of the console. Maybe there is a sticker covering it?

[futureman2000]

TY! There was a sticker there, looks like it was placed by the modder in Hong Kong or somesuch. Glad I didn't pull on it too hard.

[Duo_R]

Glad you didn't either! ;-)