RGB mod coregrafx2/supercdrom2 - audio question

[Cyborc]

I have a grey Super CDROM2 and Core Grafx II unit. I'd like to RGB mod them. However, From my experience I always get audio buzzing when using scart cables with other RGB systems. Shielded cables help but the buzz is still noticeable while wearing headphones so I usually try to separate the audio by adding separate audio jacks or other methods.

Can I do the RGB mod on the core grafx II unit itself and run a cable from the core grafx II to my monitor and run a cable from the super cdrom2's av output to my stereo? I'm hoping if I do the mod this way there wouldn't be any buzzing since the signals aren't travelling together in the same cable.

[schweaty]

you can.  the output on the coregrafx outputs simultaneously with the output on the CDROM

I recently component modded my Super CDROM.  I replaced the stock DIN socket w/ a 8-DIN socket and I dont have any audio issues at all.  I wonder if the RGB amp board you are using is causing the audio issues.

[Fidde_se]

Yes... If it solves any buzzing thats another question entirely.