6260 Lifted pin 47...

[MNKyDeth]

Well, I didn't do the Jail bar fix when I originally put wires on the pins of my 6260 chip.

I went back in to add the caps for the jail bar fix and slightly nudged my wires on the chip. It broke the green wire loose and lifted the pin off the mobo. It also pulled the pad under it off the board.

So yeah... In hindsight do the jailbar fix before putting the wires on the chip.

Anyways, I have done everything I need to get the green wire reattached and secured it with a dab of hotglue.

My question is, is there a place I can solder the green wire too, to get the green channel back into the composite connection?