RIP to BT Garner of MindRec.com... BT passed away early 2023 from health problems. He was one of the top PCE homebrew developers and founder of the OG Turbo List, then PCECP.com. Condolences to family and friends.
IMG
IMG
Main Menu

Duo DC power

Started by Vimtoman, 12/23/2015, 07:27 AM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Vimtoman

Can somebody tell me the correct size of the DC power plug for a Duo and Super cd-rom.

Thanks

mickcris


Vimtoman


SegaSonic91

I'm wondering if it is possible to replace the plug on the DUO with one from a CD-ROM2 or PCE so I can use an MD PSU?  Same for the SCD2 and IFU.  The main thing I wonder about is the fact that CD-ROM2 and PCE's are centre negative whilst the other two are centre positive.

MNKyDeth

Well, for the TurboDuo and PC Engine Duo's you can grab a Sega 1602 PSU and this cable.
http://console5.com/store/turbo-duo-power-supply-plug-adapter-cable.html

Far cheaper than buying an original PSU.

SegaSonic91

I would jump on that if I was in the US.  I instead decided to buy a DUO and IFU PSU from Retro Game Supply.  Not cheap as it was in Euro's, which is an worse conversion rate for me than the US$, but I guess it will be worth it.  I will need to make another order for a SG+SCD2 and RX PSU, seeing as the cheap POS RX plug I bought from HK Game Doctor (with its pathetic 10cm cord!) is playing up.

Keith Courage


SegaSonic91

Damn!  Now THAT is what I have been looking for!  Too bad I already ordered the DUO PSU  :roll:

wilykat

I used the power supply for PS2 slim for my Duo-R. The first one I got was a clone that looked a lot like real Sony brand, it was causing noisy video. Got rid of it and found a real Sony brand, it's been working fine since then.

Nice thing about PS2 slim, it doesn't hog the outlet space like many wallwart do, including Sega adapters.

mickcris

#9
Quote from: Keith Courage on 12/28/2015, 12:56 PM
Quote from: MNKyDeth on 12/28/2015, 12:06 PMWell, for the TurboDuo and PC Engine Duo's you can grab a Sega 1602 PSU and this cable.
http://console5.com/store/turbo-duo-power-supply-plug-adapter-cable.html

Far cheaper than buying an original PSU.
This one is cheaper http://www.ebay.com/itm/Top-DC-Charger-Connector-Adapter-6-0x3-0mm-Male-Laptop-to-2-1x5-5-mm-Female-Plug-/271665355178?hash=item3f408459aa:g:WzYAAOSwdpxUYdCc
keep in mind that this adapter does not switch polarity to those that would buy it.  You would need to to use it with a center positive 5.5mm x 2.1mm tip power supply.  The cable listed by MNKyDeth does switch polarity so it can be used with the Sega Model 1 Genesis supply on a Duo.

The above adapter does work well for use with a supergrafx and SCD2:
https://www.pcengine-fx.com/forums/index.php?topic=19255.msg410922#msg410922