pc engine duo-r problem

[yukin]

hi, i replace the laser in my pc engine and now when i press run it do a little sound then nothing. and on the screen it stay at the waiting.

someone can help me?

[Tatsujin]

your laser is defective.

[yukin]

ah ok, i found the problem, a wire on the white plug is remove. is they anyway a can get a new one?

[blueraven]

ah ok, i found the problem, a wire on the white plug is remove. is they anyway a can get a new one?

Be very careful, and re-solder the wire to the connector on the plug. Do Not Pull!! That's usually how those come apart in the first place.

[yukin]

ok i resolder the wire in the plug, then i test it. it not give me anymore a strange beep. now the light busy stay on and the cd turn. but it stuck at just a moment...

is it again the laser or something else?

[Platinumfungi]

What issues was the system exhibiting that made you decide to replace the laser? Was everything working properly before you replaced the laser?

[yukin]

before i chnage the laser, i could not read any disc. thats why i chnage it. but i think the laser i buy is defect. cause everything seem to work at the execption of the laser that not moving when i press run. the cd and the busy red light open but it stuck on the boot screen