Topics

[Buy/Sell/Trade / FS: Duo-RX Component Video and Region Mod or trade for boxed Turbo Duo]

$340 shipped or best offer. I would trade for a boxed Turbo Duo.

The Duo-RX has a region mod, with switch located under hu card door, UV (purple) power led, original controller and power supply, and rgb to component converter installed. For some reason the LED looks blue in the picture, but it is purple.


Duo-RX










Composite



Component

[Console Repair/Mod Center / Supergrafx Capacitor Question]

I just got a Supergrafx that had an RF mod, I removed it and noticed a capacitor was missing from C117. Can anyone open there's up and give me the value of the missing capacitor? The system doesn't have composite video from the AV port without out it, still works from the expansion port though.

EDIT: This should have been posted in the repair section, so mods feel free to move it.

[Buy/Sell/Trade / IC Region Chips for TG16/PCE/DUO's $17 shipped]

$17 shipped, includes 4551 chips pre-soldered. These chips are for region modding TG16/PCE/Duo's. I had to change the pinout at the bottom so it would incorporate both SMD and DIP MC14551 versions. The H-A were not supposed to be there so on install they should be ignored and it goes like this

From Left to Right Pin:
15 PCB
15 Hu Connector
16 PCB
16 Hu Connector
23 PCB
23 Hu Connector
22 PCB
22 Hu Connector
17 PCB
17 Hu Connector
19 PCB
19 Hu Connector
21 PCB
21 Hu Connector
20 PCB
20 Hu Connector




Also when installing instead of using a 5V source, I have found that using the IN pin on the Voltage regulator is FAR more stable and you won't have issues where some games will crash after a few minutes of play.

[Buy/Sell/Trade / IC Region Chips for TG16/PCE/DUO's $17 shipped]

$17 shipped for one and $15 each additional, includes 4551 chips pre-soldered. PCB's without the 4551's are $12 shipped for one and $10 each additional. If you want them quicker add $4 for priority mail. These chips are for region modding TG16/PCE/Duo's. I had to change the pinout at the bottom so it would incorporate both SMD and DIP MC14551 versions. The H-A were not supposed to be there so on install they should be ignored and it goes like this

From Left to Right Pin:
15 PCB
15 Hu Connector
16 PCB
16 Hu Connector
23 PCB
23 Hu Connector
22 PCB
22 Hu Connector
17 PCB
17 Hu Connector
19 PCB
19 Hu Connector
21 PCB
21 Hu Connector
20 PCB
20 Hu Connector




Also when installing instead of using a 5V source, I have found that using the IN pin on the Voltage regulator is FAR more stable and you won't have issues where some games will crash after a few minutes of play.

[PCE/TG-16|CD/SGX Discussion / Composite, S-Video and Component Comparison Shots]

So I modded a couple of units with S-Video using a CXA1645 to convert the RGB into S-Video and a CVS287 to convert RGB to Component. I noticed a big difference in clarity and colors. It looks like the original composite signal is washed out on the TG16/PCE/Duo and much better with the CXA1645. I'm using a 27" JVC CRT SDTV.

TG16/PCE/DUO Composite




Composite out from CXA1645




S-Video out from CXA1645




Component out from CVS287




TG16/PCE/DUO Composite




Composite out from CXA1645



S-Video out from CXA1645




Component out from CVS287




TG16/PCE/DUO Composite




Composite out from CXA1645



S-Video out from CXA1645




Component out from CVS287

[Buy/Sell/Trade / FS: Duo-RX Component Video and Region Mod]

$325 shipped or best offer. I would trade for a boxed Turbo Duo.

The Duo-RX has a region mod, with switch located under hu card door, UV (purple) power led, original controller and power supply, and rgb to component converter installed. For some reason the LED looks blue in the picture, but it is purple.


Duo-RX










Composite



Component

[Buy/Sell/Trade / TG16 Sold]

sold, thank you.