• Welcome to PCEngine-FX.com. Please log in.
 

RIP to BT Garner of MindRec.com... BT passed away early 2023 from health problems. He was one of the top PCE homebrew developers and founder of the OG Turbo List, then PCECP.com. Condolences to family and friends.
IMG
IMG
Main Menu

PC Engine Controller Hacks

Started by cpsystem3, 08/17/2010, 11:20 AM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

cpsystem3

Hi everyone- I made a controller mod PCB just like the one posted below last night:

wayback://monkey.co/pce/pad.htm
New: monkey.co/nes-to-pc-engine-controller-mod

I built the circuit, verified all wiring and PCB connections and everything is perfect, however it doesn't work right. The right direction is always activated, and when I press right, it activates button II. I did notice that when I disconnect wire #3 from the Din8 cable, the issue goes away (but right and button II dont' work at all). Any idea what is going on? Is it possible my issue is because I used a 74LS157B chip instead of a 74LS157 (accidently ordered the 'B' type, not sure whats different).

Please help! The mod came out visually amazing, however its not usable yet  :(

Ultimately this is so I can play my PC Engine on an arcade cab... video and audio are already working perfect, just sorting out controls.

hoobs88

These sites might be able to help you. Although I suspect it is probably because you have the 'B' version of the chip.

https://gamesx.com/
https://moddedbybacteria.wordpress.com/
1 title needed for a complete US Turbo Grafx collection: Magical Chase
Parasol Stars High Score = 119,783,770
https://www.pcengine-fx.com/forums/index.php?topic=9292.0
League of Legends Summoner Name = DeviousSideburns

cpsystem3

Well that sucks. The chips I got are indeed good, I swapped it into an official controller and it works just fine. I even tried using the IC out of a PC Engine controller, and got the same results. The schematic is bad, however I can't quite figure out exactly what is bad.

Unfortunately I only have turbo-fire controllers and its a bit hard for me to discern what resistors/caps are needed just to support rapid fire. There are a handful more resistors than shown on the schematic, and 3 caps in an official controller (1 electrolytic and 2 ceramic discs). Does anybody have a non-turbo fire PC engine controller? I would really appreciate a scan of the PCB, and possibly the value of a few of the resistors installed on the board. I know I can fix the schematic up with a little assistance...

hoobs88

You need 74LS163 chip for rapid fire.
1 title needed for a complete US Turbo Grafx collection: Magical Chase
Parasol Stars High Score = 119,783,770
https://www.pcengine-fx.com/forums/index.php?topic=9292.0
League of Legends Summoner Name = DeviousSideburns

Duo_R

Did you ever get it working? Here is a document that might help you.

megaupload.com/?d=L5J7BKBG

/img0201uz9.jpg
IMG
Add my YouTube channel: https://youtu.be/sOg93QUtlg0
For sale trade list: https://tinyurl.com/2csm7kq