RGB & AV Scart Cables for EXT Connector PCE/TG16

[Fidde_se]

I'm making a small batch of these.


They will be pricey as the parts are not that cheap and making them are very time consuming, especially making the EXT Connector...
Probably they will only be interesting for Europeans as Scart for the rest of the world is non existing, and why not MOD the consoles instead you think as you won't be able to use the CD-ROM2 when this is connected, true but this is made for purists and collectors that don't want to mod their precious jewels.

For any PCE/TG16 with full 69Pin EXT connector.

If any one just want AV that works too... Any lengths too.

[TurboDude420]

Totally interested in just the AV cable (no scart for me), wont have money for a couple of months though. Looking for probably a 6 foot cable.

[tggodfrey]

Where did you find the connector for the EXT of the TG16?

[Dalder]

Will these work with SuperGrafx systems ? and work on Sony PVM 2530 monitors ? let me know please thanks!

[Opethian]

is there going to be an AMP build for the RGB signals? I might be interested if there is.

[Fidde_se]

The connector is handbuilt by me, 5-10 hours of labor, there is sawing, clipping, glueing, soldering, lots of stuff that has to be bought and custom made to make this connector... There is an amp inside yes, working on a possible S-Video converter to be at the end, one day, but never forget RGB makes S-Video look bad... there is always Scart RGB to HDMI converters =)

As SuperGrafx have a 69Pin connector it will work with those too.

If an PVM 2530 has the 25DSUB CMPTR connector and you have the right connector for it, it should work as it inputs RGB....
http://www.docs.sony.com/release/PVM2030.pdf

[tggodfrey]

I'll pass.  I'll make one when I need it.