FS: RGB amped PC Engine systems and RGB amps/cables

Started by mickcris, 04/11/2015, 09:16 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

mickcris

RGB amps and scart cables are here:
https://www.pcengine-fx.com/forums/index.php?topic=18845.0

If you need a region switch, one can be installed in any console I am selling for an extra cost.

RGB Tennokoe 2 - comes with scart cable.
Has had a DIN 8 and AV jacks added to the back.  Expansion port has been trimmed so it will also work on a TG16 as well as PC Engine systems.  Saving tested and verified working.  Have minor scuffs and scratches.  All have the battery cover, but one had the clip part of the cover almost broken off so a bit of epoxy was added to it.

Asking $75 each shipped in the USA (1 available)
IMG
a few more pics


All BELOW ARE SOLD:

mickcris


mickcris


mickcris

#3
bump. CoreGrafx added

mickcris


mickcris


SmokeMonster

Awesome offerings and great prices. Someone really needs to grab that great RGB Duo!

mickcris


mickcris

swapped out controller for original an original white Duo-R controller that I just got.  I am about to clean and whiten it.  Will put this up on ebay in a few days if there is still no interest in it.

mickcris

bumping again.  still have not got around to putting the duo-r on ebay so its still available.

mickcris


mickcris


mickcris


garrethohman

If you ever mod another supergrafx will buy asap!

mickcris

Quote from: garrethohman on 01/05/2016, 09:52 PMIf you ever mod another supergrafx will buy asap!
Depends on if I can find a descent deal on another one. I was expecting that one to have a cracked board as it was sold as not working but all it needed was the cart slot cleaned.  Most people are asking too much even for broken ones 

edit: also lowered prices

Soviet Conscript

so the Ten No Koe 2 connected to my coregrafx II will give it RGB output?
Oh my god! They're not even human!

mickcris


mickcris


CGQuarterly


mickcris

Quote from: CGQuarterly on 01/22/2016, 11:21 PMJesus, that SuperGrafx was a god damned steal.
I got a good deal on it since it was supposed to be broken so i passed along the savings.  :)  had it actually been broken and i had to spend time fixing it, i probably would have charged a bit more.

mickcris


mickcris


mickcris

bump.  added a couple core grafx systems.

CGQuarterly

Do you ever just sell RGB-modded systems without all of the peripherals?

mickcris

Quote from: CGQuarterly on 04/09/2016, 11:39 PMDo you ever just sell RGB-modded systems without all of the peripherals?
not normally but I could.

mickcris


Onslaught35

Any chance you'll have a normal white PC engine w/RGB mod up anytime soon? Would also want SCART cable, controller, power cord suitable for USA use...

mickcris

Quote from: Onslaught35 on 05/28/2016, 01:34 AMAny chance you'll have a normal white PC engine w/RGB mod up anytime soon? Would also want SCART cable, controller, power cord suitable for USA use...
probably not anytime soon.  i do have a couple here i have been meaning to mod, but havent got around to it.

mickcris


mickcris

if anyone was interested in that shuttle but holding off cause of the everdrive issue, it has been fixed by installing a region mod.  still need to place the switch in its permanent location before i can add a pic.

mickcris

#30
added a pce duo and dropped the price of the shuttle

edit:
Duo has been sold

mickcris


mickcris


crazydean

I guess you decided to fix those systems. Good luck with the sales!

mickcris

thanks.  i got 2 done so far.  will get them all eventually. :)

mickcris


mickcris


mjsaville


SmokeMonster


mickcris


mickcris


mickcris


SIRSLY

The Duo works great!  Thank you so much!  8)

TelcoSurveyor

I would like to do this to an extra tennokoe 2 that I have laying around. Will the complete kit you sell allow me to add the composite output or just the RGB? Forgive my ignorance, as I am new to the RGB stuff.

Thanks!
I'm the Wind, Baby!

mickcris

Quote from: TelcoSurveyor on 06/14/2017, 01:42 AMI would like to do this to an extra tennokoe 2 that I have laying around. Will the complete kit you sell allow me to add the composite output or just the RGB? Forgive my ignorance, as I am new to the RGB stuff.

Thanks!
the kit is just for RGB but i can include some rca jacks for you

TelcoSurveyor

Quote from: mickcris on 06/14/2017, 06:39 PM
Quote from: TelcoSurveyor on 06/14/2017, 01:42 AMI would like to do this to an extra tennokoe 2 that I have laying around. Will the complete kit you sell allow me to add the composite output or just the RGB? Forgive my ignorance, as I am new to the RGB stuff.

Thanks!
the kit is just for RGB but i can include some rca jacks for you
I've got some RCA jacks laying around, I was just curious about the smaller chip next to the RGB amp. It looks to me like the composite A/V signal runs from the expansion port>smaller chip>RCA jacks>RGB jack.
I'm the Wind, Baby!

mickcris

Yeah, it's a board I put a 75 ohm resistor and 220uf cap for the comp video and also some protection caps for the audio lines.  I can include one of those boards if you want

TelcoSurveyor

I'm the Wind, Baby!