2/13/2025: Localization News - Cosmic Fantasy 3-4!

Rather earth-shattering news in the PC Engine / TurboGrafx-16 community: Cosmic Fantasy 3 & 4 has been officially localized to English by Edia 30 years later for the Switch! Hard to believe! I know their script quality is poor given the 1&2 port but still good to see.
nintendo.com/us/store/products/cosmic-fantasy-collection2-switch/
Main Menu

Turbo Duo Modder needed

Started by Green, 10/11/2016, 05:36 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Green

I recently had my Turbo Duo recapped (professionally) because there was no audio. After the recapping there is still no audio and the store I took it to doesn't have the expertise to further troubleshoot an obscure system so here I am.
I bought a RGB to component board, component couplers, and region unlock board (tiny little thing) too. I was hoping someone here could steer me to someone to further repair and mod for me. Obviously I will pay them.

Thanks!

780racer

I highly recommend TheSteve. The dude can almost fix anything.

tbone3969

Keith Courage is really good as well.
"There's something out there in those trees and it ain't no man. We're all gonna die."

jperryss

I've had positive experiences with both Keith Courage and mickcris.

Green

How about MNKyDeth? Anyone with experience with him?

mickcris

Quote from: Green on 10/13/2016, 08:00 PMHow about MNKyDeth? Anyone with experience with him?
see here for a review of MNKyDeth's service:

YoshiKnuckles

I can do the work too, but my return times are rather long right now.  :( Been really busy with college lately.

I've also installed one of those RGB > Component boards before. Came out really nicely.

Green

Got the Duo back from MNKyDeth and I highly recommend him. Kept me in the loop with status pictures and was accurate with cost estimate.

Even modded a Monster Cable for me!
Recap, region mod and component mod. Very happy with it.

mario_pic

Quote from: Green on 10/11/2016, 05:36 PMI recently had my Turbo Duo recapped (professionally) because there was no audio. After the recapping there is still no audio and the store I took it to doesn't have the expertise to further troubleshoot an obscure system so here I am.
I bought a RGB to component board, component couplers, and region unlock board (tiny little thing) too. I was hoping someone here could steer me to someone to further repair and mod for me. Obviously I will pay them.

Thanks!
sounds like the threw holes failed on near the sound caps i usualy clean the threw holes and run a solid wires threw to be shure the sound is always solid its bit of a pain but still able to be done easy